A USB-C plug tells you what fits. It does not, by itself, tell you whether a charging setup meets the LEFEET P1 Lite’s fast-charge requirement. Before buying another adapter, check the charger’s specification, the port you will use, and the cable.
Start with 100 W PD 3.0 compatibility
LEFEET specifies a compatible 100 W PD 3.0 charger for the P1 Lite’s full-speed USB-C charging. Its listed charging time is approximately 1.5 hours with suitable equipment. Treat that as a planning reference, rather than a promise that any USB-C adapter will deliver the same result.
The current EAGLEROAM standard package includes a USB-C cable but no wall charger. Check the contents of your selected package before ordering, especially if you are comparing bundles from different sellers.
Read the output for the port you plan to use
Find the charger maker’s output information, not just the large wattage printed on the front. If the adapter lists different outputs for individual ports or combinations of connected devices, check the combination you intend to use.
For example, if you want to charge a phone alongside the scooter, verify the listed output with both connected. Do not assume that a charger’s total rating is available to every port at once. If the documentation does not establish the required output and PD compatibility, ask the charger manufacturer before relying on it for the advertised charging time.
Keep the cable in the decision
Use the supplied USB-C cable as your starting point. If you need a replacement, confirm its suitability for the required charging power with the cable maker or EAGLEROAM. A familiar connector shape alone is not enough to establish that.
This is also a useful check before departure: identify the adapter, port and cable together at home, so you are not trying to resolve an unclear specification between water sessions.
Plan a charging break for the whole scooter
The P1 Lite has a built-in, non-removable battery. Plan to recharge the unit itself; do not build your day around swapping in a spare battery. Allow time for the care steps in the manual as well as charging. Our P1 Lite care guide covers cleaning, drying and storage after saltwater use.
Before you leave, make sure you can answer four questions: Is the charger compatible with 100 W PD 3.0? Which port will you use? Is the cable suitable? Does your schedule include a charging break?
See the LEFEET P1 Lite product page for the current package details, or ask EAGLEROAM about your charging setup before ordering.